FORT WAYNE, INDIANA, April 18, 2011– Steel Dynamics, Inc. (NASDAQ-GS: STLD) today announced first quarter net income of $106 million, or $0.46 per diluted share on net sales of $2.0 billion. Comparatively, first quarter 2010 net income was $65 million, or $0.29 per diluted share on net sales of $1.6 billion and fourth quarter 2010 net income was $8 million, or $0.04 per diluted share.
First quarter 2011 steel shipments were 1.5 million tons, 4 percent higher than the first quarter of 2010 and 10 percent higher than the fourth quarter of 2010. The average external steel selling price for the first quarter increased $154 per ton to $890 from the first quarter 2010 average of $736, and increased $137 per ton from the fourth quarter 2010 average of $753. The first quarter’s average ferrous scrap cost per ton charged increased $86 compared to the first quarter 2010 and $60 in comparison to the fourth quarter 2010 average.
OmniSource ferrous shipments in the first quarter were 1.5 million gross tons, 24 percent higher than the first quarter of 2010 and 23 percent higher than the fourth quarter of 2010. OmniSource provided 54 percent of the ferrous scrap purchased by SDI’s steel mills during the first quarter. First quarter non-ferrous shipments were 287 million pounds, 20 percent higher than the first quarter of 2010 and 25 percent higher than the fourth quarter of 2010.
“Our first quarter earnings were significantly higher than our fourth quarter results based on both volumes and margins at our steel and metals recycling operations,” said Keith Busse, Chairman and CEO. “Our steel operations achieved operating income of $196 million, or $138 per ton shipped, a 114 percent increase in operating income over fourth quarter results. These results were led by our sheet steel and SBQ bar operations. In addition, OmniSource recorded operating income of $49 million, one of our strongest quarters since the economic collapse in the fall of 2008. The higher steel industry utilization rate continues to strengthen demand for recycled ferrous materials.
“Our Engineered Bar Products and Flat Roll divisions continue to operate at essentially full capacity. Engineered Bar has maintained its extended order backlog for special-bar-quality steel as demand remains strong. We are currently planning a 10-day outage at Engineered Bar in April for scheduled maintenance; however, we do not believe this will meaningfully impact second quarter shipments. Sheet steel demand also continues to be strong as we enter the second quarter.
“Unfortunately, the sustained weakness in the non-residential construction market remains a challenge for our structural and fabrication operations. Our commitment to rail as a complement to our structural operations remains strong, as first quarter rail shipments were 31,000 tons, our highest quarterly volume so far. We are encouraged by our progress entering this market, and plan to increase our participation throughout 2011,” Busse said.
The company’s Mesabi Nugget start-up facility in Minnesota resumed operations in January after taking an outage for equipment modifications. Since the restart, Mesabi has achieved higher facility utilization and improved production volumes. Nugget shipments increased to 36,000 metric tons in the first quarter from 18,000 metric tons in the fourth quarter of 2010. Since the beginning of April, the plant has been operating at a monthly rate of 20,000 metric tons. Mesabi Nugget start-up losses negatively impacted the company’s pre-tax first quarter earnings by $11 million, or approximately $.03 per diluted share, after-tax.
“We are pleased with the continued production improvements at Mesabi. With the additional supply of liquid pig iron from Iron Dynamics to our flat roll mill, we have nearly achieved our goal of self-sufficiency of iron for our steel operations,” said Busse.
“Looking ahead for 2011, our view remains optimistic. We are seeing the continuation of improvements in the U.S. economy and still anticipate increased steel consumption throughout the year as sectors, such as automotive, transportation, energy, industrial, agricultural, and construction equipment, maintain momentum. We also expect the second quarter to be solid and will provide quantitative guidance in June,” Busse concluded.
First Quarter 2011 Operating Segment Information
The following highlights first quarter 2011 results for each of SDI’s three primary operating segments. References to segment operating income and operating income per ton in the following paragraphs exclude profit-sharing costs and amortization related to intangible assets.
Steel Operations. This segment includes five electric-arc-furnace steel mills and related steel finishing and processing facilities, including The Techs. The company’s steel operations produce flat-rolled steel, structural steel, merchant bars, special-bar-quality steel, rail, and specialty shapes. Steel operations represented 59 percent of the company’s first quarter 2011 external net sales and 60 percent of the fourth quarter 2010 external net sales.
First quarter 2011 net sales for steel operations were $1.3 billion on shipments of 1.5 million tons, compared to net sales of $1.0 billion on shipments of 1.4 million tons during the same period in 2010 and $979 million in net sales on shipments of 1.3 million tons in the fourth quarter of 2010 (including intra-segment and intra-company sales). The average external steel selling price for the first quarter increased $137 per ton to $890 from the fourth quarter 2010 average of $753. The first quarter’s average ferrous scrap cost per ton charged was $60 higher than the fourth quarter of 2010. First quarter operating income for the steel segment was $196 million, or $138 per ton shipped, compared to $138 million, or $99 per ton, in the first quarter of 2010, and $91 million, or $70 per ton, in the fourth quarter of 2010.
Metals Recycling and Ferrous Resources. This segment principally includes the company’s metals recycling operations (OmniSource Corporation), liquid pig iron manufacturing facility (Iron Dynamics), and iron nugget manufacturing start-up facility (Mesabi Nugget, which is 81 percent company owned). First quarter net sales and operating income for the segment were $1.1 billion and $47 million, respectively, as compared to $756 million and $32 million during the first quarter of 2010 and $770 million and a loss of $4 million during the fourth quarter of 2010 (including intra-company sales). The segment represented 37 percent of the company’s first quarter 2011 external net sales and 35 percent of the fourth quarter 2010 external net sales.
OmniSource first quarter 2011 ferrous shipments were 1.5 million gross tons and non-ferrous shipments were 287 million pounds, compared to shipments of 1.2 million gross tons and non-ferrous shipments of 238 million pounds for the first quarter of 2010 and shipments of 1.2 million gross tons and non-ferrous shipments of 230 million pounds for the fourth quarter of 2010. Forty-four percent and 42 percent of OmniSource’s ferrous scrap shipments were to SDI’s steel mills during the first quarter of 2011 and fourth quarter of 2010, respectively. During the first quarter, OmniSource supplied 670,000 gross tons of ferrous scrap to SDI’s steel operations, or approximately 54 percent of the tonnage of ferrous scrap purchased by the mills. Operating income for OmniSource was $49 million during the first quarter of 2011 as compared to $43 million during the first quarter of 2010 and $9 million during the fourth quarter of 2010.
Steel Fabrication Operations. Steel fabrication operations includes New Millennium Building Systems, which fabricates steel joists, trusses, and decking used in the construction of non-residential buildings. Fabrication operations represented 3 percent of the company’s first quarter 2011 external net sales and 4 percent of fourth quarter 2010 external net sales.
First quarter 2011 net sales for fabrication operations were $53 million on shipments of 44,000 tons, compared to $24 million on shipments of 26,000 tons during the same period in 2010 and $57 million on shipments of 50,000 tons during the fourth quarter of 2010 (including intra-company sales and shipments). First quarter operating losses for the fabrication segment were $3 million, as compared to $7million in the first quarter of 2010 and $13 million in the fourth quarter of 2010 (which included a non-cash impairment charge of $13 million).
Forward Looking Statements
Conference Call and WebcastOn Tuesday, April 19, 2011, at 10:00 a.m. Eastern time, Steel Dynamics will host a conference call in which management will discuss first quarter results. You are invited to listen to the live audio broadcast of the conference call over the Internet, accessible from the Steel Dynamics Web site:
www.steeldynamics.com
Dial-in information is available here. An audio replay of the Webcast and a downloadable podcast will be available from the SDI Web site. No telephone replay will be available.
Contact:
Fred Warner, Investor Relations Manager
(260) 969-3564 or fax (260) 969-3590
f.warner@steeldynamics.com